What the Packager actually does
The Packager is not a vacuum and it does not clean anything. It takes the dust you already collected and packs it into capsules that can travel along a conveyor belt. That is the whole function, and it is the single most important purchase in the game, because it removes the walk between your work area and the depot.
You need two things before it: the Building tool ($50), which unlocks the Logistics menu, and then $100 for the Packager itself. Total cost of entry: $150.
Build order that works
- Buy the Building tool ($50) from the Supply Wall and place the foundation you want to build on.
- Buy the Packager ($100) in Logistics and place it inside your working area, not at the depot. It belongs where the dust is.
- Connect the Packager's output to a conveyor belt. Belts cost $0.50 per metre and a single section runs up to 30 m.
- Run the belt to the depot's outside intake. Patch 1.0.3 made goods delivered to the outside intake sell automatically — no manual shipment launch required.
- Unload into the Packager with E. Your tool's container empties into it and comes back out as capsules.
- Watch one capsule get sold before you build anything else. If the money counter does not move, the connection is wrong, not the machine.
The parts, and what each costs
| Part | Price | Job |
|---|---|---|
| Building tool | $50 | Unlocks Logistics and foundations |
| Packager | $100 | Packs dust into capsules |
| Conveyor belt | $0.50 per metre | Moves capsules; up to 30 m per section |
| Splitter | $20 | One line into two |
| Merger | $20 | Two lines into one |
| Capsule Catcher | — | Receives robot capsules; holds 100 kg since 1.0.4 |
| Small solar panel | $150 | Power for the line |
| Solar tracker | $100 | Keeps output up through the day cycle |
Placement: where the Packager goes
Place it where you are sweeping, at the edge of the patch you are working, not next to the depot. The depot end is fixed; the dust end moves. A Packager near the dust plus a long belt is worth more than a Packager next to the station and a long walk.
When the work area moves, move the Packager with it and extend the belt. That is why the belt is priced per metre: you are meant to keep adding to it.
What patch 1.0.6 changed for belts
Until 1.0.6 a conveyor was flat and straight: everything on it had to sit on the same level, in a line. Patch 1.0.6, released on November 16, 2026, is the factory update (11 changes, 18 fixes) and it rewrites how routing works:
- Belts snap to a grid, so a line lines up cleanly instead of drifting a few centimetres off each connection.
- 45°, 90° and 180° turns are supported, meaning a route can bend around a crater instead of crossing it.
- Diagonal runs are possible, so the shortest line between the Packager and the intake is now an option, not just the axis-aligned one.
- Belts climb ramps and stairs, which is the change that matters most: a Packager down in a low patch can now run straight up to a depot above it.
- A whole route counts as one belt, so a long run through several turns behaves as a single line rather than as pieces you have to reconnect.
- Railings are drawn per metre and follow the platform, which is the cosmetic half of the same update.
Practical effect for your build: the old advice — put the Packager as close to the depot as the dust allows — was a workaround for flat, straight belts. Since 1.0.6 you can place the Packager where the dust actually is and route the belt over the terrain, so the machine's position matters more than the route's length.
Splitters and mergers
Once you run more than one Packager, the lines have to be joined. A merger ($20) combines two belts into one, and since patch 1.0.4 mergers alternate between their inputs instead of favouring one. A splitter ($20) does the opposite and sends one belt into two, which is what you want when a single intake would otherwise back up. Any crewmate can place splitters and mergers on belts built by other players as of 1.0.4, so co-op groups no longer need the host to build everything.
When the line stops
- "Could not pack a capsule" — fixed in patch 1.0.4. If you are on an older build, that message is the bug, not your layout.
- Capsules move but you earn nothing — the belt is not connected to the depot's outside intake. Goods only auto-sell there.
- A route that was one belt now behaves oddly after 1.0.6 — rebuild the connection and let it snap to the grid. Routes made before the patch are the usual suspects, because they were never grid-aligned.
- Mergers or splitters do nothing — check belt direction first, then make sure every player in the session is on the same version (1.0.6 is current). Automation reliability issues still exist in some builds, so avoid rebuilding a whole network on a hunch.
- Machines pause with power and materials — the line is short of power. Add panels before adding more machines.
What comes after the Packager
Two directions, and they pay differently:
- Cleaning: robot vacuums ($250 for MK1, $500 for MK2) and eventually J.O.O.N.A.S. ($20,000) clean ground without you. J.O.O.N.A.S. sends capsules to the nearest Capsule Catcher, which holds 100 kg since 1.0.4, so it needs a catcher near its work area.
- Processing: the pressure chamber ($500) turns dust into moon sand at about three times the value, and the stone press ($1,000) turns sand into moon stone at roughly seven times. Both draw power, so build the supply first.
The full price and power list is on the machines page, and the income side is on the money guide.